The form of the final map shall conform to the Subdivision Map Act and as follows:

The final map shall be legibly drawn, printed, or reproduced by a process guaranteeing a permanent record in black on polyester base film. Certificates, affidavits and acknowledgments may be legibly stamped or printed upon the map with opaque ink. If ink is used on polyester base film, the ink surface shall be coated with a suitable substance to assure permanent legibility.

The size of each sheet shall be 18 inches by 26 inches or 460 by 660 millimeters. A marginal line shall be drawn completely around each sheet, leaving an entirely blank margin of one inch or 0.025. The scale of the map shall be not less than 1" = 50' (unless specified otherwise by the County Surveyor), or as may be necessary to show all details clearly, and enough sheets shall be used to accomplish this end. The particular number of the sheet and the total number of sheets comprising the map shall be stated on each of the sheets, and its relation to each adjoining sheet shall be clearly shown. All printing or lettering on the map shall be of one-eighth inch minimum height and of such shape and weight as to be readily legible on prints and other reproductions made from the original drawings. If more than three sheets are used, a key diagram shall be included. The final form of the final map shall be as approved by the Department of Public Works. (Formerly 23.07.004)